Filter holders

This lightweight adapter ring for the Olympus 7-14 F/2.8 lens is designed to mount Kase's K100-K9 holder on your lens and use 100mm wide filters.
 

This lightweight adapter ring is specially made for Canon's ultimate ultra-wide angle lens with tilt and shift mechanisms, the TS-E 17 MM, to mount Kase's K100-K9 holder on your lens and use 100mm wide filters.
 

The Kase K75 is ideal for the landscape photographer who likes compact and, for example, works with a system camera and/or lenses with a smaller filter size up to 67mm. The holder is suitable for lenses with a filter thread of 37 -67mm * (with the correct adapter ring).
The Kase K75 holder has room for a maximum of 3 filters with a width of 75 mm and a thickness of 1.1 mm. The holder is made from high-strength and lightweight aircraft aluminum and uses a screw locking mechanism to prevent accidental removal.
The adapter has an ingenious magnetic solution for the circular polarizing filter, making it very quick to install and remove. To rotate the filter, a mechanism with a small gear is installed.
 

This magnetic Armour filter holder set with CPL contains 2 screw adapter set-up rings 67-82 and 72-82, 2 magnetic adapter rings 77 and 82mm and 2 magnetic frames, which can be attached to your current 2mm square filters in sizes 100x100 and 100x150 . Just like Kase's other holders, the holder has a very functional wheel on the side to rotate the CPL filter.

Characteristics

This magnetic Armour K150P filter holder set with 2 magnetic frames is an addition to the traditional Kase K150P set, by adding a magnetic filter holder and magnetic frames, everything becomes even easier to use.
The Kase K150P system is a filter holder system specifically designed for ultra-wide-angle zoom lenses that do not fit traditional screw-on filters.
 

The Kase Armour K150P system works like the K100 Armour system.
You will need to take your traditional 150x150 and 150x170 mm filter and mount it in a magnetic frame, this kit comes with 2 but you can purchase additional square or rectangular ones.
It comes with a special screwdriver to help you install the filters.
The magnets are extremely strong and the filter will never simply fall. It takes quite a bit of force to remove the filter.
The Kase K150P is very versatile because it can be mounted on other standard lenses thanks to an adapter.
 

This lightweight adapter ring for the Nikon Z14-24 lens is designed to mount Kase's K100-K9 holder on your lens and use 100mm wide filters.
 

This Kase K9 filter holder is specially made for the Sony 14mm F1.8
The holder fits 2 pieces of 100mm square filters and the large K150P CPL filter.
 

In the box
adapter ring
K9 holder plate
CPL - slots for K9
K150P magnetic circular CPL 150mm
Filter cap

The Kase K100-X Holder Kit K9 is suitable for lenses with a filter thread of 67-86 mm. The holder has room for a maximum of 3 filters with a width of 100 mm and a thickness of both 2 mm and 1.1 mm. The holder is made from high-strength and lightweight aircraft aluminum and uses a screw locking mechanism to prevent accidental removal.
The adapter has an ingenious magnetic solution for the circular polarizing filter, making it very quick to install and remove. To rotate the filter, a mechanism with a small gear is installed.
Optionally available an 86mm magnetic adapter ring.
 

IT IS THE K8 RENEWED BY LISTENING CAREFULLY TO OUR CUSTOMERS
We made the K9 according to their wishes
- Lighter and slightly smaller, optimal for the Slim filters
- To avoid vignetting on modern lenses, we increased the diameter of the magnetic CPL from 86mm to 90mm
 

Kase K150 II Holder Sony FE 12-24mm F/4
This Kase K150 II holder has been specially developed for the Sony FE 12-24mm F/4 with convex front element and integrated lens hood.
The holder has been developed for our 150mm filters. The filter holder can accommodate two filters in the standard configuration (parts for a third filter slot are included). In the construction we have paid attention to the possibility of quick assembly and disassembly. The material used is CNC-machined 6063 aluminum, which suppresses light reflections within the filter holder due to the matte black finish.

With the suitable adapter rings, this filter holder can easily be adapted to lenses with a filter size of 82 mm or smaller.

Most important features:

This adapter ring is specially designed to mount on a Sony 12-24 F2.8 lens, in which you can place a magnetic circular CPL and/or also a holder K150P III, with slots for square filters of 150x150/150x170.
 

A professional filter holder for Fuji 8-16mm, complete with a K150P filter holder, a Magnetic CPL filter (Ø150mm) and a canvas bag for the 150mm system. Kase K150P Filter Holder is a professional and rotatable filter holder for rectangular 150mm filters, with a thickness of 2mm. The filter holder has a double filter lock for 150 mm filters, as well as space for, for example, a round Ø150 mm polarizing filter (CPL) in the holder. The polarizing filter is mounted with a magnetic holder on the front of the filter holder, making it possible to quickly attach or remove the polarizing filter. This way, the filter is mounted in the filter holder and you are not bothered by stray light. The filter holder closes completely backwards between the lens and the filter holder, which is a prerequisite for the use of extreme ND filters, for example.
The polarizing filter rotates smoothly via a rotating wheel on the side of the filter holder. Because the polarizing filter can be rotated independently of the filter holder, you can keep the filter holder horizontal. Polarizing filter is a very useful filter, it removes, weakens or strengthens reflexes, weakens UV radiation and gives better colors.
If you would also like to use this holder on other lenses, you can use the Kase K150P magnetic adapter with screw filter.
 

A professional filter holder for Nikon 14-24mm, complete with a K150P filter holder, a Magnetic CPL filter (Ø150mm) and a canvas bag for the 150mm system. Kase K150P Filter Holder is a professional and rotatable filter holder for rectangular 150mm filters, with a thickness of 2mm. The filter holder has a double filter lock for 150 mm filters, as well as space for, for example, a round Ø150 mm polarizing filter (CPL) in the holder. The polarizing filter is mounted with a magnetic holder on the front of the filter holder, making it possible to quickly attach or remove the polarizing filter. This way, the filter is mounted in the filter holder and you are not bothered by stray light. The filter holder closes completely backwards between the lens and the filter holder, which is a prerequisite for the use of extreme ND filters, for example.
The polarizing filter rotates smoothly via a rotating wheel on the side of the filter holder. Because the polarizing filter can be rotated independently of the filter holder, you can keep the filter holder horizontal. Polarizing filter is a very useful filter, it removes, weakens or strengthens reflexes, weakens UV radiation and gives better colors.
If you would also like to use this holder on other lenses, you can use the Kase K150P magnetic adapter with screw filter.

Most important features:

A professional filter holder for Sigma12-24mm F2.8 Sony Mount, complete with a K150P filter holder, a Magnetic CPL filter (Ø150mm) and a canvas bag for the 150mm system. Kase K150P Filter Holder is a professional and rotatable filter holder for rectangular 150mm filters, with a thickness of 2mm. The filter holder has a double filter lock for 150 mm filters, as well as space for, for example, a round Ø150 mm polarizing filter (CPL) in the holder. The polarizing filter is mounted with a magnetic holder on the front of the filter holder, making it possible to quickly attach or remove the polarizing filter. This way, the filter is mounted in the filter holder and you are not bothered by stray light. The filter holder closes completely backwards between the lens and the filter holder, which is a prerequisite for the use of extreme ND filters, for example.
The polarizing filter rotates smoothly via a rotating wheel on the side of the filter holder. Because the polarizing filter can be rotated independently of the filter holder, you can keep the filter holder horizontal. Polarizing filter is a very useful filter, it removes, weakens or strengthens reflexes, weakens UV radiation and gives better colors.
If you would also like to use this holder on other lenses, you can use the Kase K150P magnetic adapter with screw filter.
 

A professional filter holder for Sony 12-24mm F2.8, complete with a K150P filter holder, a Magnetic CPL filter (Ø150mm) and a canvas bag for the 150mm system. Kase K150P Filter Holder is a professional and rotatable filter holder for rectangular 150mm filters, with a thickness of 2mm. The filter holder has a double filter lock for 150 mm filters, as well as space for, for example, a round Ø150 mm polarizing filter (CPL) in the holder. The polarizing filter is mounted with a magnetic holder on the front of the filter holder, making it possible to quickly attach or remove the polarizing filter. This way, the filter is mounted in the filter holder and you are not bothered by stray light. The filter holder closes completely backwards between the lens and the filter holder, which is a prerequisite for the use of extreme ND filters, for example.
The polarizing filter rotates smoothly via a rotating wheel on the side of the filter holder. Because the polarizing filter can be rotated independently of the filter holder, you can keep the filter holder horizontal. Polarizing filter is a very useful filter, it removes, weakens or strengthens reflexes, weakens UV radiation and gives better colors.
If you would also like to use this holder on other lenses, you can use the Kase K150P magnetic adapter with screw filter.